1. downloads
  2. business software
  3. news
  4. reviews
  5. top apps
Télécharger SpeedFan 4.51

SpeedFan 4.51

Par Almico  (Logiciel gratuit)
Note des utilisateurs
Publicité

SpeedFan is a program that monitors voltages, fan speeds and temperatures in computers with hardware monitor chips. SpeedFan can even access S.M.A.R.T. info and show hard disk temperatures.

SpeedFan supports SCSI disks too. SpeedFan can even change the FSB on some hardware (but this should be considered a bonus feature).

SpeedFan can access digital temperature sensors and can change fan speeds accordingly, thus reducing noise.

SpeedFan can find almost any hardware monitor chip connected to the 2-wire SMBus (System Management Bus (trademark belonging to SMIF, Inc.), a subset of the I2C protocol) and works fine with Windows 9x, ME, NT, 2000, 2003, XP and Windows Vista. It works with Windows 64 bit too.

SpeedFan can handle:

  • almost any number of South Bridges
  • almost any number of hardware monitor chips
  • almost any number of hard disks
  • almost any number of temperature readings
  • almost any number of voltage readings
  • almost any number of fan speed readings
  • almost any number of PWMs
Titre: SpeedFan 4.51
Nom de fichier: instspeedfan451.exe
Taille de fichier: 2.12MB (2,218,504 Octets)
Exigences: Windows (Toutes les versions)
Langues: Langues Multiples
Licence: Logiciel gratuit
Date ajoutée: février 23, 2015
Auteur: Almico
www.almico.com
Vérification MD5: D72598669FE0AD05854A7C0C47F99279

* Added full support for Fintek F71811U
* Added full support for Nuvoton NCT6106D
* Added full support for Nuvoton NCT6792D
* Added full support for Fintek F71878A/F71868A
* Added full support for ITE IT8783F
* Added full support for Intel C610/X99 SMBus
* Added full support for ITE IT8620E
* Added support for Nuvoton NCT6683D
* Fixed Fintek F71808A PWM MODE setting
* Added PWM 4 ENABLE and PWM 5 ENABLE to advanced options for the ITE IT8620E to enable or disable PWM 4 and 5 writes
* Smbus access is disabled for Sapphire PC-AM2RD790
* Fixed fan speed readings on the NCT6791D
* SCSI Scan is automatically disabled if iastorA.sys driver is installed - use /DOSCSISCAN to force enable it
* Fixed Fintek F71811U PWM TYPE advanced setting
* Greatly improved RAM SPD decoding for SDRAM, DDR, DDR2, DDR2 FB-DIMM and DDR3
* Improved identification of newer revisions of Microchip MCP9843 and MCP98243
* Fixed STTS3000 and STTS2002 temperature reporting
* Fixed old IT8705F identification
* Events can now be triggered if something happens for, at least, up to 9999 times (it was 99)
* Battery charge is now properly updated on the EXOTICS tab
* NCT6791D IO Space accessibility is now tested upon resume from suspend and fixed, if needed
* Restored DIMM access on latest Intel chipsets
* Added manifest to improve support up to Windows 10
* Configuration dialog now always opens at the center of the main window