Technitium MAC Address Changer allows you to change Media Access Control (MAC) Address of your Network Interface Card (NIC) irrespective of your NIC manufacturer or its driver.
The app has a really simple user interface and provides ample information regarding each NIC in the machine. Every NIC has a MAC address hard coded in its circuit by the manufacturer. This hard coded MAC address is used by Windows drivers to access Ethernet Network (LAN). Technitium MAC Address Changer’s tool can set a new MAC address to your NIC, thereby bypassing the original hard coded MAC address.
- Internet Protocol v6 (IPv6) support.
- Automatic Update.
- Update network card vendors list.
- Command line options.
The interface is well-organized and has three tabs, all of which give you full control, not only over the MAC address of your network adapter, but also over IP addresses and other network settings. The ‘Information’ tab shows the current connection, device, hardware and config ID, the current status of TCP/IPv4 and TCP/IPv6, original and active MAC addresses. The bottom area of the window is used to change the MAC address to a randomly generated one, or one you create. From here, you can automatically restart network connection to apply any changes you make.
Overall, Technitium MAC Address Changer is an efficient tool. It has an easy to use interface, coupled with several other utilities that give you more control over your network.
We don't have any change log information yet for version 6.0.7 of Technitium MAC Address Changer. Sometimes publishers take a little while to make this information available, so please check back in a few days to see if it has been updated.