HP Battery Check4.1.0.2

Hewlett Packard(Darmowa)

Ocena użytkownika6

Reklama

HP Battery Check is an easy-to-use tool, which can be run in order to verify the functionality of the primary and secondary batteries installed in HP Notebooks.

To run HP Battery Check, the AC adapter must be connected to the computer, and the battery must have at least a partial charge. If the battery being tested has a charge of 3% or less , then HP Battery Check will report the test as ‘invalid’. HP also recommend the AC adapter is plugged in, and the battery has been allowed to charge with the computer turned off for a minimum of 30 minutes, before testing it, in order to ensure that the test results are valid.

When scanned, the HP Battery Check app displays the status of the battery. If any additional action is required, a message will be displayed. It will either be Ok, Calibrate, Replace, No Battery, or Error.

Battery Check Messages:

  • OK indicates the battery is functioning correctly.
  • Calibrate indicates the battery is functioning correctly, but it needs to be calibrated.
  • Replace indicates that based on the charge capacity of your battery it has reached the end of its useful life.
  • No Battery indicates that either a Primary battery was not detected, or a Secondary battery was not detected.
  • Error indicates an error was encountered trying to access the battery.

HP Battery Check supports all HP Vista and Windows 7 consumer and commercial notebook PCs.

With HP Battery Check you will be able to quickly and easily learn of the status of your laptop battery within a few seconds. This is a really useful tool, if you are experiencing faulty battery performance, as you will be able to rapidly check it and then diagnose the problem.

Tytuł:
HP Battery Check, 4.1.0.2 dla Windows
Rozmiar pliku:
9.48 MB
Wymagania:
  • Windows 10,
  • Windows 7 64-Bit,
  • Windows Vista 64-bit,
  • Windows 10 64-bit,
  • Windows 2008 R2,
  • Windows 2008 64-bit,
  • Windows Vista,
  • Windows 2003,
  • Windows 7,
  • Windows 2000,
  • Windows 9x,
  • Windows 8,
  • Windows XP,
  • Windows 2012,
  • Windows 2008,
  • Windows XP 64-bit,
  • Windows 8 64-bit
Język:
Polski
Dostępne języki:
  • Polski,
  • Angielski,
  • Włoski,
  • Francuski,
  • Hiszpański,
  • Chiński,
  • Niemiecki,
  • Japoński
Licencja:
Darmowa
Dodano datę:
Tuesday, October 25th 2016
Autor
Hewlett Packard

https://www.hp.com

SHA-1:
9ec4ca683d4a8c0194a5bf493e58dfc2f3ee4f1b

Nie mamy jeszcze żadnych informacji o dzienniku zmian wersji 4.1.0.2 HP Battery Check. Czasami wydawcy poświęcają trochę czasu na udostępnienie tych informacji, więc sprawdź ponownie za kilka dni, aby sprawdzić, czy zostały zaktualizowane.

Czy możesz pomóc

Jeśli masz jakiś dziennik zmian, podziel się z nami! Chcemy poznać Twoją opinię! Napisz doStrona kontaktowai daj nam znać.